{"product_id":"haosline-panel-bonding-adhesive-2-part-epoxy-for-auto-body-panels-200-ml-black","title":"HAOSLINE Panel Bonding Adhesive – 2-Part Epoxy for Auto Body Panels, 200 mL, Black","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eHAOSLINE Panel Bonding Adhesive is a robust two‑part epoxy designed to create strong, durable bonds for non‑structural metal body panels. Supplied in a 200 mL black cartridge, this system blends into your workflow with a generous working time and a solid final cure, making it suitable for everyday repairs and restoration projects where clean alignment matters.\u003c\/p\u003e\n\u003ch3\u003eWhat you can bond\u003c\/h3\u003e\n\u003cp\u003eThis adhesive excels at joining components such as quarter panels, roofs, door skins, roof skins, and van sides. It supports multi‑material assemblies, helping you tackle diverse builds without swapping products mid‑project.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for non‑structural metal panels on cars, vans, and light trucks\u003c\/li\u003e\n  \u003cli\u003eDesigned for multi‑material bonding including steel, aluminum, plastics, and FRP\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance helps maintain appearance and longevity in automotive environments\u003c\/li\u003e\n  \u003cli\u003eHeat cure option can speed final performance when needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterials and compatibility\u003c\/h3\u003e\n\u003cp\u003eThe adhesive adheres well to steel, aluminum, polycarbonate, polystyrene, SMC, and fiberglass (FRP). It is not recommended for PP, PE, or POM substrates, so verify material compatibility before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel, aluminum, plastics, FRP, SMC\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate and polystyrene common in automotive panels\u003c\/li\u003e\n  \u003cli\u003eNot recommended for PP, PE, POM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWorking time, cure, and strength\u003c\/h3\u003e\n\u003cp\u003eWorking time is approximately 90 minutes at 77℉, with a clamp window of about 4 hours and a full cure around 24 hours at the same temperature. If you heat cure at 176℉, full cure can be accelerated to about 3 hours. After 7 days at room temperature, shear strength ranges around 15–25 MPa when fully cured, with a faster result possible via heat curing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking time: ~90 minutes; clamp time: ~4 hours\u003c\/li\u003e\n  \u003cli\u003eFull cure: ~24 hours at 77℉; heat cure possible\u003c\/li\u003e\n  \u003cli\u003eShear strength: 15–25 MPa after 7 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface treatment: wipe the bonding surfaces free of rust, water, and oil; sand severely rusted areas as needed\u003c\/li\u003e\n  \u003cli\u003eEqualize cartridge: extrude until equal amounts from both sides, then screw on the mixing nozzle and discard about 5 g\u003c\/li\u003e\n  \u003cli\u003eApplication: apply the mixed adhesive evenly, then align and join the parts\u003c\/li\u003e\n  \u003cli\u003eCuring: allow the adhesive to cure for the specified time; note that ambient temperatures below 59℉ may extend cure times; heat cure at 176℉ for 3 hours can accelerate the process\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor best results, follow the guidance above and consider ambient conditions and material compatibility. This product is intended for non‑structural panel bonding, offering a practical option when precise alignment and corrosion resistance are valued in automotive tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What surfaces can HAOSLINE Panel Bonding Adhesive bond?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It bonds steel, aluminum, plastics, SMC, FRP, and other non-structural auto body panels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does it take to cure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Working time is about 90 minutes at 77℉; full cure is 24 hours (heat cure at 176℉ speeds this to about 3 hours).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HAOSLINE","offers":[{"title":"Default Title","offer_id":42470141296725,"sku":"B0G528CYVD","price":48.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3270\/4597\/files\/haosline-panel-bonding-adhesive-200ml.jpg?v=1778119884","url":"https:\/\/plentytorque.co.uk\/products\/haosline-panel-bonding-adhesive-2-part-epoxy-for-auto-body-panels-200-ml-black","provider":"PlentyTorque","version":"1.0","type":"link"}