{"product_id":"sobobos-tire-inflator-adapter-2-pack-brass-clip-on-lock-on-schrader-valves-250-psi-open-flow","title":"SoBoBoS Tire Inflator Adapter 2-Pack Brass Clip-On Lock-On Schrader Valves, 250 PSI Open-Flow","description":"\u003cp\u003e\u003cstrong\u003eSoBoBoS 2-Pack Tire Air Chuck converts a compatible screw-on inflator chuck into a clip-on, lock-on Schrader valve adapter for quicker, hands-free inflation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you want faster, more reliable inflation with portable or electric inflators, this pair of brass clip-on adapters lets you swap a screw-on hose end for a lock-on connection to standard Schrader valves. Built with a threaded male end that screws into a matching female screw-on inflator chuck and a clip-on tire-side fitting, the adapters create a steadier seal for cars, SUVs, trucks, motorcycles, and other vehicles that use Schrader stems. They are open-flow style (no internal shutoff), so start and stop air at the inflator itself.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install the SoBoBoS adapter on my inflator?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: thread the male end into the inflator’s female screw-on chuck until snug, then use the clip-on end on the tire’s Schrader valve. Keep the adapter straight while seating to form the best seal and avoid leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew the 0.305\"-32 TPI (8V1) male thread into the inflator’s female chuck.\u003c\/li\u003e\n  \u003cli\u003ePress the lever, push the clip-on fully onto the Schrader stem, then release to lock.\u003c\/li\u003e\n  \u003cli\u003eBegin inflation from the inflator; stop at recommended pressure and remove by pressing the lever.\u003c\/li\u003e\n  \u003cli\u003eReseat if air escapes; recessed valves may require extra clearance to operate the lever.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich valve types and inflators work with this adapter?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is designed specifically for standard Schrader valves and inflators with a female 0.305\"-32 TPI (ISO 4570 8V1) screw-on chuck. It will not work with Presta bicycle valves, 1\/4\" NPT shop compressor fittings, or inflators lacking the matching threaded chuck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Schrader (car-style) valve stems only.\u003c\/li\u003e\n  \u003cli\u003eRequires an inflator whose hose end has a female 0.305\"-32 TPI (8V1) thread.\u003c\/li\u003e\n  \u003cli\u003eNot a closed-flow or self-shutting chuck; control airflow at the inflator.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with standard industrial compressor threads like 1\/4\" NPT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and pressure ratings should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe adapters pair a corrosion-resistant brass body with a flexible silicone seal for repeated use and a better seating surface against Schrader stems. They are open-flow fittings rated for typical automotive inflation tasks up to 250 PSI.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBody: durable brass resistant to rust and wear.\u003c\/li\u003e\n  \u003cli\u003eSeal: silicone gasket to reduce air loss when fully seated.\u003c\/li\u003e\n  \u003cli\u003eFlow type: open-flow — start\/stop from the inflator unit.\u003c\/li\u003e\n  \u003cli\u003eMaximum working pressure: 250 PSI.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these adapters help when I need hands-free inflation?\u003c\/h3\u003e\n\u003cp\u003eYes — the clip-on lock keeps the chuck attached while you operate the inflator, so you won’t need to hold the hose against the valve. Because there’s no internal shutoff, you must monitor inflation from your inflator or gauge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLock-on clip reduces the need to hold the valve during inflation.\u003c\/li\u003e\n  \u003cli\u003eHelps limit air loss when attaching and removing the chuck.\u003c\/li\u003e\n  \u003cli\u003eTwo-pack gives a spare for another inflator or a replacement on the go.\u003c\/li\u003e\n  \u003cli\u003eNot an automatic-pressure cutoff; use a gauge or inflator settings to stop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, DIY mechanics, and anyone using portable or electric tire inflators who wants quicker connections to Schrader valves will benefit from the SoBoBoS 2-pack adapter. It's ideal if your inflator currently uses a screw-on chuck and you prefer a clip-on, lockable attachment for hands-free inflation. Avoid buying if your gear uses Presta valves or non-matching inflator threads — always confirm your inflator has a female 0.305\"-32 TPI (ISO 4570 8V1) screw-on chuck before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit my portable inflator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits inflators with a female 0.305\"-32 TPI (ISO 4570 8V1) screw-on chuck; confirm your inflator has that thread before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on Presta bicycle valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This clip-on adapter is only for Schrader valves and will not seal Presta stems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SoBoBoS","offers":[{"title":"Default Title","offer_id":43021214482517,"sku":"B0H6XM6KNY","price":16.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/3270\/4597\/files\/sobobos-front-view-brass-tire-chuck.jpg?v=1789815885","url":"https:\/\/plentytorque.co.uk\/products\/sobobos-tire-inflator-adapter-2-pack-brass-clip-on-lock-on-schrader-valves-250-psi-open-flow","provider":"PlentyTorque","version":"1.0","type":"link"}