KBS Coatings 8304 DiamondFinish Watercolor Clear Coat - 1 Pint, Coats Up to 50 Sq Ft

KBS Coatings 8304 DiamondFinish Watercolor Clear Coat overview

This one part clear coat is designed to go directly onto metal or painted surfaces without mixing. It dries to a hard, clear film and helps preserve the look of the surface while adding a protective layer. With a per pint coverage of up to 50 square feet, DiamondFinish is a practical choice for projects that seek a clean, professional finish.

Key benefits at a glance

• Direct To Metal Application - No Additives Needed
• Apply directly to Painted Surfaces
• Single Part Formula designed to be tougher and harder than typical two part clears
• Seals both paints and metals and self levels to minimize brush marks

Real world use scenarios

• Hardware, trim, and metal surfaces can gain a clear protective layer without additional mixing
• Painted surfaces such as cabinets, automotive trim, or tools can receive a topcoat that preserves color and texture
• The self leveling film helps achieve a smooth finish even on irregular shapes

How to think about coverage and finish

Expect a clear film that preserves the underlying hue while delivering a hard, durable layer. The product is designed to be convenient for single coat projects and to reduce brush marks thanks to its leveling action.

Product notes

Coverage estimates are approximate and depend on surface texture and application thinness. Work in thin layers, follow standard safety guidelines, and allow adequate cure time between coats for best results.

Why choose DiamondFinish for your projects

This clear coat combines direct-to-metal convenience with a seal that protects both painted surfaces and bare metal. The single component formula reduces the number of steps on busy projects, and the self leveling action helps you avoid visible brush marks, resulting in a smooth, glassy feel in the final look. While results vary with surface prep and application technique, users often find the patina of underlying paint remains vibrant under the clear layer.

What to expect when applying

The clear coating dries with a crisp, glassy look that clarifies the surface texture. It creates a low friction, smooth feel when you run a gloved finger across the finish. Underlying colors may subtly show through depending on the surface, but the coat stays clear and unobtrusive.

Best practices

Apply in thin, even layers. Use standard safety equipment and work in a clean, well-lit area. Maintain a consistent distance while applying and allow each coat to cure before handling to achieve the smoothest possible result.