U-POL Dolphin Glaze Self-Leveling Polyester Finishing - 440ml

Overview

U-POL Dolphin Glaze is a two‑component chemical liquid designed for the final skim of a polyester putty repair or for direct application on minor bodywork imperfections before over‑painting. The formulation is shrink‑resistant and self‑leveling, helping to create a smooth surface without pinholes. It dries to a tack‑free film that resists bleed‑through, supporting a clean edge when you skim over finished body filler or address small flaws on a panel before the final paint layer.

Applied as a finishing layer, the glaze forms a durable polyester finish that remains robust under ongoing handling during the repair process. The self‑leveling action helps to even out irregularities on curved or uneven areas, reducing the need for heavy sanding and enabling you to build a uniform surface with fewer passes. Quick drying means you can apply multiple coats in a single work session, accelerating project timelines without compromising control.

Designed for compatibility with a range of substrates, Dolphin Glaze can be used on bare steel, galvanized or zinc‑coated steels, aluminum, and OEM surfaces. This versatility supports multiple repair scenarios, from skim patches over repaired areas to addressing subtle imperfections prior to priming and painting. The squeeze bottle design facilitates controlled application, allowing you to lay down a thin, even layer with careful, deliberate movements.

Why choose Dolphin Glaze

• Water‑Resistant Polyester Finish: A durable layer that helps protect repaired panels from moisture exposure during finishing.
• Self‑Leveling Formula: Creates a smooth, even surface on uneven or curved sections for a professional look.
• Quick Drying: Dries rapidly to enable multiple coats and faster project completion.
• Long Lasting Color: Delivers a vibrant, durable appearance that withstands wear over time.
• Easy Application: Squeeze bottle supports precise, controlled application on any surface.

Use and results

For best results, start with a clean, dry surface and work in a well‑ventilated area. Apply a thin, even coat and allow it to set before evaluating the finish. If needed, apply additional coats, using the self‑leveling action to minimize visible edge lines and achieve a seamless transition toward the final paint stages. Remember, while the glaze is designed to be friendly to repair workflows, outcomes depend on technique, surface condition, and environmental factors.

Substrate compatibility

The product is suitable for bare steel, galvanized/zinc‑coated steels, aluminum, and OEM surfaces. This makes Dolphin Glaze a flexible option for skim repairs over finished body filler or direct treatment of minor imperfections before priming and topcoat activities.