edelbrock
-
Edelbrock 1464 Carburetor Step-Up Spring Kit – Pack of 5 (Vehicle-Specific)
Overview The Edelbrock 1464 Carburetor Step-Up Spring Kit is a compact, steel-driven set designed to help you dial in your carburetor’s response. This 5‑spring pack includes a complete range to match different tuning needs: 3 Hg (blue), 4 Hg (yellow), 5 Hg (orange), 7...- £31.07
- £31.07
- Unit price
- per
-
Edelbrock 1468 Accelerator Pump Assembly | Enhanced Throttle Response
OverviewThe Edelbrock 1468 Accelerator Pump Assembly is designed to deliver a precise surge of fuel through the accelerator pump circuit when you press the throttle. This targeted fuel delivery helps the engine respond more quickly during off-idle transitions, reducing lag and contributing to a...- £35.50
- £35.50
- Unit price
- per
-
Edelbrock 2696 Four-Hole Square-Bore to Spread-Bore Carburetor Adapter | Vehicle-Specific Fit
Overview The Edelbrock 2696 four-hole adapter is a precise aluminum spacer designed to bridge square-bore carburetors with spread-bore intake manifolds. By replacing the original equipment unit, it creates a flexible path to customize your setup without a full intake swap. Crafted for durability and...- £55.94
- £55.94
- Unit price
- per
-
Edelbrock 2701 Performer Intake Manifold — Dual-Plane Aluminum for Square-Bore Carbs
Overview The Edelbrock 2701 Performer Intake Manifold is engineered for performance-minded engines that use square-bore carburetors. Crafted from lightweight aluminum with a natural finish, it blends race-ready design with everyday reliability. The dual-plane layout is optimized for strong torque from idle through the midrange,...- £293.76
- £293.76
- Unit price
- per
-
Edelbrock 8134 Chrome Fuel Line Kit – Right-Side Routing for Carbs
Overview The Edelbrock 8134 Chrome Fuel Line Kit offers a clean, purpose-built solution for carburetor plumbing. Its drop-down routing places the fuel line on the right-hand (passenger) side of the carburetor, tucked below the linkage and choke housing for a tidy, professional install. This...- £60.60
- £60.60
- Unit price
- per
-
Edelbrock 8603 High Flow Thermostat – 53mm Opening, 160°F | Vehicle-Specific
Heritage meets modern cooling performance Rooted in Edelbrock's Proven Performance philosophy, this thermostat carries the spirit of Vic Edelbrock Sr.'s early garage-driven pursuit of quality. Since 1938, Edelbrock has combined practical engineering with a passion for reliable parts, and the 8603 High Flow Thermostat...- £38.24
- £38.24
- Unit price
- per
-
Edelbrock 8723 Half-Inch Carburetor Spacer – 4-Hole Wood Fiber Laminate
Overview The Edelbrock 8723 half-inch carburetor spacer is designed to provide a little extra breathing room for your intake path. As an open spacer, it increases plenum volume and adds distance between the carb and the plenum floor, allowing air and fuel to flow...- £64.05
- £64.05
- Unit price
- per
-
Edelbrock 8725 Carburetor Spacer — 0.5 in Phenolic, Dual-Plane Fit for Enhanced Torque and Throttle Response
Unlock enhanced throttle response with the Edelbrock 8725 Carburetor Spacer The Edelbrock 8725 spacer spaces the carburetor above the intake flange, expanding the plenum and refining air and fuel distribution. Built with heat-insulating phenolic fiber and finished in a natural look, it helps keep...- £61.75
- £61.75
- Unit price
- per
-
Edelbrock AVS2 1906 Carburetor - 650 CFM with Electric Choke, Satin Finish
Overview The Edelbrock AVS2 1906 carburetor is a satin-finished four-barrel unit built for street performance. With a 650 CFM rating and electric choke, it balances responsiveness and reliability across idle, cruising, and light throttle. The satin finish adds a refined look to many engine...- £550.27
- £550.27
- Unit price
- per
-
Edelbrock Chrome Fuel Line for Square-Bore Carburetors – 3/8 Inlet, Steel Construction
Overview Upgrade your Edelbrock square-bore carburetor with a chrome-finished fuel line that blends style with solid steel construction. This single feed line emphasizes a clean, timeless look under the hood while delivering a reliable fuel path to your carburetor. Designed specifically for Edelbrock square-bore...- £54.03
- £54.03
- Unit price
- per
-
Edelbrock EDL4403 Pro-Flo Black Round Breather – 1 1/4 in Valve Cover Hole, Push-In Tube
Overview Elevate your engine bay with Edelbrock's Pro-Flo Black Round Breather. This Signature series breather is designed to pair with Edelbrock valve covers, delivering a clean, cohesive look under the hood and a purpose built venting solution for day to day driving and weekend...- £30.81
- £30.81
- Unit price
- per








