U-POL Raptor Tintable Urethane Bed Liner Kit with Free Spray Gun — 4 Liters

Overview

U-POL Raptor Tintable Bed Liner Kit is a two‑component urethane system designed to protect and personalize truck beds. It can be applied directly to most factory paint finishes or self‑etching primer surfaces, delivering a durable, flexible coating that resists wear and weathering without compromising original aesthetics.

Its rapid drying and resilient film help shield metal from rust, corrosion, UV damage, and temperature extremes. The coating also serves as an effective sound deadener in cabins and undercar areas, contributing to a quieter ride while guarding exposed surfaces against daily wear.

What you get

• Four 750 ml (25 oz) tintable bed liner bases
• One 1 liter hardener
• Application spray gun (requires 8 cfm @ 50-60 psi)
• Instructions for DIY or professional use

Key benefits

• Scratch and stain resistant surface that stands up to rough use
• UV resistant coating that helps minimize fading over time
• Flexible, waterproof film that reduces road noise and vibration
• High adhesion to existing paint and clean surfaces for dependable protection

Surface prep matters: lightly sand or scuff the surface and remove dirt and rust for proper adhesion. If bare metal is present, treat with U-Pol #8 Acid Primer before applying bed liner.

Drying and curing times vary with temperature and film buildup. At 68°F, the pot life is 60 minutes, with touch dry in under an hour. Light‑duty use is typically possible after 2–3 days, while regular use is feasible after 5–7 days. The kit covers about 125 square feet (standard 8 ft bed), and you can apply additional coats after 60 minutes to build the desired texture and protection.

Application tips

• Shake thoroughly, then shoot with even sweeping motions to achieve your texture
• Coats can be added after 60 minutes for enhanced protection
• Texture can also be achieved by rolling or brushing if preferred

This waterproof formulation remains flexible to accommodate movement, helping to dampen sounds and reduce vibration. A Prop 65 warning applies due to certain chemicals; following the included guidelines can support safer handling and better results. Total kit makes about 1.06 US gallons of tintable liner.