Sidebar

Categories

Stok durumu

Fiyat

£
to
£

Featured Products

BETERNY Expedition cover with waterproof outer layer protects against rain and dust.BETERNY expedition cover highlights UV protection to keep the paint cool.

BETERNY Waterproof Car Cover for Ford Expedition / Lincoln Navigator SWB (1997-2026) – All-Weather Custom-Fit

OverviewMeet the BETERNY car cover, crafted to fit the Ford Expedition and Lincoln Navigator SWB from 1997 through 2026. The gray fabric blends with most backyards and driveways, delivering a discreet, low-reflection look while shielding your vehicle from the elements. This tailored solution is...
£93.12
£93.12
WnSEu MSCRP LS Gen 3 valley pan cover plate with low-profile design for tighter engine bays.WnSEu valley pan gasket and seals for reliable sealing on Gen III LS blocks.

WnSEu MSCRP LS Gen 3 Valley Pan Cover Plate - Low Profile with Gasket & Seals

Overview The MSCRP LS Gen 3 Valley Pan Cover Plate with Gasket and Seals is designed for a clean, compact install on Gen III LS engine blocks. Its low-profile form helps preserve hood clearance while delivering a tight, factory-like appearance in the engine bay....
£71.42
£71.42
Dicor RP-MRC-1 coating can Arctic White for metal RV roofs, durable reflective protection.Metal RV roof being coated with RP-MRC-1 for lasting resilience.

Dicor RP-MRC-1 Acrylic Elastomeric RV Roof Coating - White, 1 Gallon

Overview Dicor RP-MRC-1 is an acrylic elastomeric roof coating designed specifically for metal RV roofs. It uses 100 percent acrylic elastomeric resins to form a rubber like finish that flexes with roof movement, helping maintain a seal as the seasons change. This product is...
£82.92
£82.92

PQY

Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • PQY throttle body spacer installed under the hood improves air flow and responsivenessPQY throttle body spacer boosts off-idle torque and smooth throttle response preview

    PQY 1-Inch Throttle Body Spacer for Jeep TJ/YJ/XJ 2.5L/4.0L – Raise Manifold, Gasket Included

    Boosted throttle response with the PQY 1-Inch Throttle Body Spacer The PQY throttle body spacer sits between the throttle body and intake manifold, adding a touch of extra plenum volume. This small but solid 1-inch spacer helps the air charge remain dense as you...
    £39.93
    £39.93
  • PQY 12-point cylinder head stud kit front view for LS engines highlights rugged hardware for reliable sealingPQY M11 head stud closeup showing centerless ground and heat treated surface

    PQY 12-Point Cylinder Head Stud Kit for Chevy LS Engines – LS1/LS3, 4.8L-6.0L (LS6/L98)

    Overview The PQY 12-Point Cylinder Head Stud Kit is built to refresh aging hardware on Chevy LS family engines. It is designed to work across multiple variants, including LS1, LS3, LS6 and L98, with displacements from 4.8L up to 6.0L and 5.3L/5.7L options. As...
    £87.86
    £87.86
  • PQY 12-point cylinder head stud kit box showing complete hardware for quick installation.PQY M11 head stud close-up for high-torque capability.

    PQY 12-Point Cylinder Head Stud Kit for GM LS Engines | Fits 97-03 Chevy LS1/LQ9/LS6 4.8L-6.0L

    PQY 12-Point Cylinder Head Stud Kit for GM LS Engines Designed for the LS family, this head stud kit provides a practical upgrade path for popular GM configurations. It supports 4.8L, 5.3L, 5.7L, and 6.0L engines and is compatible with 97-03 Chevy LS1/LS6 variants,...
    £93.33
    £93.33
  • PQY remote filler neck with straight aluminum cap for easy outside fueling.PQY billet aluminum gas cap close-up highlighting durable, lightweight construction.

    PQY 17-2530 Remote Fuel Tank Filler Neck with Billet Aluminum Cap & Weld-On Bracket for 2-In Filler Hose

    PQY 17-2530 Remote Fuel Tank Filler Neck: Straight Alignment, Billet Aluminum Cap, and Weld-On Bracket When you’re building a custom fuel system for a dune buggy, sand rail, hot rod, or Manx-style project, reliability, accessibility, and neat routing matter. The PQY 17-2530 remote filler...
    £40.91
    £40.91
  • PQY 24in universal throttle cable assembly with stainless braided housing for smooth pedal control.PQY stainless steel braided throttle cable with aluminum fittings reduces fraying and enhances durability.

    PQY 24in Universal Throttle Cable Kit – Stainless Braided, Adjustable, Easy Install

    Overview Meet the PQY 24in Universal Throttle Cable Kit, a stainless steel braided solution designed for versatility across many vehicles and DIY projects. The design emphasizes durability, adaptable length, and a clean look compared with standard plastic sleeves. This kit aims to provide a...
    £31.06
    £31.06
  • PQY 25inch 6AN PS hose kit assembly for Chevy C10 LS swapPQY hose kit with leak proof design for high pressure PS systems

    PQY 25In 6AN Power Steering Hose Kit for Chevy C10 LS Swap | GM Type II Pump

    Elevate your Chevy C10 LS swap with a focused, high‑performance hose kit The PQY 25Inch 6AN Power Steering Hose Kit is engineered to pair with a GM Type II power steering pump, helping you route steering fluid with confidence in demanding builds. Designed for...
    £55.27
    £55.27
  • PQY red door lining bushings for Miata improve fit and reduce rattlesPQY installation with 10mm socket for Miata door bushings

    PQY 2pcs Door Lining Bushings for Mazda MX-5 Miata NA NB NC ND

    PQY 2pcs Door Lining Bushings for Mazda MX-5 MiataElevate the way your Miata feels at the curb with PQY’s door lining bushings. A direct replacement designed for Mazda MX-5 Miata models across all generations, these red bushings fit into the door lining where wear...
    £33.36
    £33.36
  • PQY 3-inch quick-release V-band clamp with flange for leak-free pipingPQY aluminum clamp locking pin closeup for secure, repeatable fastenings

    PQY 3-Inch Quick Release V-Band Clamp with Flange | Aluminum Intercooler Piping Quick Connect

    Overview The PQY 3-Inch Quick Release V-Band Clamp with Flange is a rugged, lightweight aluminum fastening solution designed for high-demand airpaths. It works with standard 3-inch intercooler piping and turbocharged intake routes, offering a secure, repeatable connection that stays tight under dynamic engine conditions....
    £45.41
    £45.41
  • PQY 36-inch stainless braided LS throttle cable full view showing durable constructionPQY braided stainless throttle cable close-up detail highlights robustness

    PQY 36-inch Stainless Braided LS Throttle Cable Kit for Chevy LS1 Engines | Adjustable Accelerator

    Compatibility and fit for Chevy LS1 engines Engineered for performance-minded builders and daily drivers, the PQY 36-inch stainless braided LS throttle cable works with Chevrolet/Chevy LS1 engines from 1997 to 2007. It covers 97-04 LS1 engines (5.7L) and 99-07 LS1 engines (4.8L/5.3L/6.0L), offering a...
    £31.04
    £31.04
  • PQY 6-port vacuum block manifold with exposed ports for precise turbo vacuum distributionPQY vacuum block kit assembled, compact design fits race car engine bays

    PQY 6 Port Vacuum Block Intake Manifold Kit 1/8NPT for Racing — Black

    The PQY 6 Port Vacuum Block Intake Manifold Kit is a compact aluminum manifold designed to distribute vacuum sources across your performance setup. With six 1/8 NPT ports, it’s built to support multiple components that rely on a steady vacuum signal, including boost controllers,...
    £32.14
    £32.14
  • PQY adjustable EFI regulator with AN8 feed and AN6 return for precise tuning.PQY billet aluminum regulator side view with red and black finish.

    PQY Adjustable EFI Fuel Pressure Regulator Kit 3-70 PSI | AN8 Feed AN6 Return (Billet Aluminum, Red/Black)

    Meet the PQY Adjustable EFI Fuel Pressure Regulator KitThe PQY regulator is forged from billet aluminum and finished in a bold red and black tone. Built for EFI systems, it offers flexible fuel pressure control across a broad range, empowering you to tailor delivery...
    £48.70
    £48.70
  • PQY adjustable EFI fuel pressure regulator kit, main view, enables precise fuel control for tuned engines.PQY billet aluminum regulator body top view showing sturdy construction and finish.

    PQY Adjustable EFI Fuel Pressure Regulator Kit 3-70 PSI | AN8 Feed, AN6 Return | Billet Aluminum

    PQY's adjustable EFI fuel pressure regulator kit is built from billet aluminum and designed for reliable fuel delivery in modern EFI systems. It features AN8 feed port, AN6 return port, a 1/8" NPT gauge port, and a vacuum boost line connection to support accurate...
    £46.51
    £46.51
  • PQY adjustable regulator top view enables precise PSI tuning for EFI systems.PQY regulator feed and return ports illustrate versatile EFI plumbing options.

    PQY Adjustable Fuel Pressure Regulator Kit 3-110 PSI with AN10 Feed Port and AN6 Return Port

    Flexible fuel pressure control for modern EFI setups The PQY Adjustable Fuel Pressure Regulator Kit is designed to provide precise control over fuel delivery for most EFI systems that run on gasoline, E85, or ethanol blends. It is not intended for diesel engines, and...
    £56.37
    £56.37
  • PQY adjustable fuel regulator body with CNC-machined aluminum for EFI reliability.PQY gauge port offers easy 1/8" NPT access during setup.

    PQY Adjustable Fuel Pressure Regulator Kit 3-70 PSI with 6AN Return & 6AN Feed Ports | AN6-6AN Fuel Line Hoses (Black/Red)

    Overview The PQY Adjustable Fuel Pressure Regulator Kit delivers flexible control for modern EFI systems. Designed to work with E85 and gasoline blends, it suits a wide range of vehicles and tuning goals. Crafted from 6061-T651 billet aluminum and CNC-machined for precise mating, this...
    £77.99
    £77.99
  • PQY adjustable fuel pressure regulator kit with 3-70 PSI range for EFI systems.PQY 6AN feed port illustration highlighting robust feed connection for fuel lines in performance builds.

    PQY Adjustable Fuel Pressure Regulator Kit — 3-70 PSI, 6AN Return & 6AN Feed

    Premium fuel pressure control for EFI systems The PQY Adjustable Fuel Pressure Regulator Kit is designed to empower a wide range of EFI builds. With a versatile 3 to 70 PSI range, this regulator supports modern blends including E85 and other ethanol-containing fuels. The...
    £77.99
    £77.99
  • PQY aluminum valve spring compressor tool on bench for precise Subaru engine workPQY roller ball thrust bearing enables smooth operation with uprated springs

    PQY Aluminum Valve Spring Compressor Tool DOHC — Subaru WRX STi Forester Legacy Outback Baja Compatible

    Overview The PQY Aluminum Valve Spring Compressor is a purpose-built tool designed for DOHC turbo Subaru engines. It enables valve spring and seal work with the head either on a bench or still in the car, helping you approach service with control and confidence....
    £43.22
    £43.22
  • PQY AN6 hose kit assembly for LS swap steering routing.PQY AN6 6AN straight end provides secure hose connections.

    PQY AN6 Power Steering Hose Kit – Fittings & Return to Reservoir for LS Swap LS1/LS3

    Enhanced Power Steering Hose Kit for LS Swaps The PQY AN6 Power Steering Hose Kit is designed to help you build a cleaner, more reliable steering system when performing GM LS swaps. Featuring sturdy hoses and precise aluminum fittings, this kit supports a smooth...
    £59.54
    £59.54
  • PQY fuel regulator AN8 feed AN6 return assembly enhances EFI fuel controlPQY regulator gauge shows 0-160 psi for precise pressure monitoring

    PQY AN8 Feed AN6 Return Fuel Regulator with 0-160 PSI Gauge | Universal EFI & E85 – Dark Black

    Discover the PQY fuel pressure regulator kit, engineered for modern EFI systems and compatible with E85 fuels. The dark black billet aluminum body combines durability with precise control, helping your vehicle respond smoothly to changing driving conditions. This inline regulator is designed for versatility,...
    £45.41
    £45.41
  • PQY baffled oil catch can 2-port, compact design for space-saving engine mounting and oil separation.PQY universal oil catch can tank, compatible with multiple vehicles.

    PQY Baffled Oil Catch Can Kit - Universal 2-Port Aluminum Oil Separator

    Overview Meet the PQY Baffled Oil Catch Can Kit, a compact aluminum reservoir designed to fit a wide range of engines where space is at a premium. Its 2-port design enables flexible routing for intake and turbo/ intercooler paths, while a built-in baffled chamber...
    £33.36
    £33.36
  • PQY baffled oil catch can with 2-port aluminum body preserves intake cleanliness.PQY oil catch can inlet and outlet with M16x1.5 threads enables easy universal installation.

    PQY Baffled Oil Catch Can Kit – Universal 2-Port Aluminum Separator with Drain Valve

    Overview Meet the PQY Baffled Oil Catch Can Kit, a compact, universal solution designed for a wide range of vehicles. Built from 6061 aluminum with a black coating, it features a 50 micron bronze filter and M16 x 1.5 inlet/outlet threads. The integrated drain...
    £34.34
    £34.34

Recently Viewed Products