Partsam 2pc 6in Amber Rectangle Marker Lights – 3-Wire Turn Signal & Marker for Trailer, Truck, RV

Overview

Discover the Partsam 2-piece 6x2 inch amber rectangle trailer lights. These compact, sealed LEDs pair a versatile 3-wire design with a practical 12 V DC setup, letting you use them as markers, turn signals, or both. Their amber glow and robust housing are built to enhance visibility on trailers, trucks, RVs, and similar vehicles, while maintaining a clean, professional look.

Flexible, 3-Wire Design

Unlike standard marker lamps, these lights offer a three-wire configuration, enabling simultaneous marker and turn signaling or separate usage as needed. The white wire provides low brightness lighting, the red wire yields high brightness signaling, and the black wire serves as the ground. This setup gives you installation flexibility without adding clutter.

• Three-wire setup allows multi-function use
• Works as a marker light, a turn signal, or both
• Simple wiring options to suit your preferred configuration

Power, Brightness, and Efficiency

Designed for 12 V systems, the lights balance performance with efficiency. In dim mode they draw about 20 mA, while the brighter signaling mode draws around 110 mA, delivering a clear amber signal without excessive power use.

Rugged, Easy to Install

Each light measures about 6 by 2 by 1.4 inches, with a hole-to-hole distance of roughly 4.8 inches, making surface mounting straightforward on sides, bumpers, or trailers. The sealed amber LED housing provides weather resistance and a tidy look for outdoor use.

• Surface-mountable design for flexible placement
• Sealed housing to resist dust and moisture
• Universal fit for most 12 V vehicles

What You Receive

• 2 x 6 inch amber rectangular trailer marker lights
• Hardwired 3-wire configuration: black ground, white low brightness, red high brightness
• Ready for direct 12 V operation; note that heavy rain or submersion is not recommended

Usage Scenarios

These lights are ideal for trailers, trucks, and RVs. Install along sides or at the rear to increase daytime and nighttime visibility and to support signaling turns without adding clutter to your existing lighting system.

Installation Tips

• If you want only marker or only turn signaling, you can use two wires and leave the third unused
• Ensure a solid ground and clean mounting surfaces for optimal illumination

Notes

The lights are designed for outdoor use and are generally waterproof, but they should not be used in heavy rain or submersion conditions. Always follow local regulations for trailer lighting configurations.