SPTA 6'' Buffing Polishing Pads – 5-Grit Foam Pads for DA/Rotary Polishers

Overview

SPTA 6 inch Buffing Polishing Pads assemble a versatile, five-pad system that spans from heavy-cut to ultra-fine finishing. Built for DA and rotary polishers, these pads are designed to help you tackle deep scratches, swirl marks, oxidation, and light paint defects with a focused, stepwise approach. The tactile feel of the open-cell foam and the steady rotation of your polisher set the stage for a controlled detailing session that emphasizes finish quality without harsh aggression.

Each pad is crafted to work with compatible SPTA compounds, while the two-sides design and hook-and-loop backing help you switch between steps quickly, keeping your workflow smooth and efficient. The result is a predictable progression from correction to refinement, with a glossy, even appearance that reads well in photos and daylight alike.

What makes this set stand out

• T120 Green – heavy-cut: Remove sanding marks and deep defects for a solid correction baseline.
• T80 Yellow – high-cut: Sharp yet controlled cutting to reduce swirl tendencies during intermediate steps.
• T60 Blue – moderate-cut: Refine the surface after initial correction with steadier control.
• T40 Orange – medium-cut: Lighten the cut to address fine scratches and oxidation without overshooting.
• T10 Red – ultra-fine finishing: Deliver a swirl-free, glossy finish suitable for final polish work.
• Unique two-sides design: Front 6.6 inch and back 6 inch surfaces reduce surface contact and broaden compound compatibility.
• Open-cell foam: Enhanced airflow for cooling and consistent cutting action, with reduced heat buildup.
• Durable, washable construction: Reusable pads that hold their shape and performance after multiple uses.
• Hook-and-loop backing: Quick pad changes and secure attachment during high-speed polishing.
• Broad compatibility: Suitable for rotary, dual-action (DA), and other polishers, plus resin, wood, and floor applications.

Workflow-ready use

• Begin with the T120 green pad on a clean, cool surface to address deeper defects.
• Progress to T80 and T60 to refine the finish and minimize swirl.
• Use T40 for light-cut correction, then finish with T10 for a polished glaze.
• Let the pad do the work at a controlled speed, applying steady pressure and overlap passes.
• Change pads as you would with any step to prevent cross-contamination of compounds.

Care and longevity

• Rinse pads with clean water after use and allow natural air drying to extend life.
• Avoid high heat during use to preserve foam integrity and texture.
• Store in a dry, dust-free area; these pads are washable and designed to last 4–5 cars or more with proper care.
• Consider using a pad conditioning brush to help maintain surface cleanliness between uses.