XYgdhqpt 3/8in U-Cut Molded Curved Fuel Line Elbow — 45°/90°/135°/180° Bend (10mm)

Overview

The XYgdhqpt 3/8 inch U-cut molded curved fuel line elbow is designed to simplify fuel line routing in compact engine bays and through tight compartments. It works with 3/8 inch hoses and hard fuel lines that run from the fuel tank to the carburetor, offering flexible bend options to help you shape lines around obstructions without compromising flow.

Key specifications

• Inner diameter: 3/8 inch (10 mm); outer diameter: about 0.65 inch
• Max working pressure: 50 psi; burst pressure: 250 psi
• Temperature range: -40°F to 257°F (-40°C to 125°C)

Installation & durability

• Customizable bends: cut the hose into 45°, 90°, 135°, or 180° angles to fit your route; trim to length and secure with a hose clamp (clamp not included).
• Constructed from fiber reinforced NBR nitrile rubber, delivering solid durability and chemical resistance for use in varied environments.

Compatibility and usage notes

• Widely used with gasoline hoses, PCV valves, and fuel injection systems. Commonly chosen for boats, hot rods, classic cars, and motorcycles.
• Please verify that the parts match your exact needs before purchasing. If unsure, reach out for verification guidance.

Practical benefits and use cases

In busy engine bays, this elbow helps you achieve cleaner, more organized fuel routing with fewer sharp twists. The range of bend angles enables routing around components, while the materials and temperature tolerance support reliability under heat and exposure to common fuels. Consider this elbow when you want a flexible, ready-to-cut solution that adapts to your specific layout—without promising results in every setup.